manualshive.com logo in svg

Motorola DS9208, Product Reference Manual, Page: 424 / 440

Share
Download
Motorola DS9208 Product Reference Manual Download Page 424

Glossary - 6

DS9208 Product Reference Guide

M

MIL. 

1 mil = 1 thousandth of a meter.

Misread (Misdecode). 

A condition which occurs when the data output of a reader or interface controller does not agree 

with the data encoded within a bar code symbol.

N

Nominal. 

The exact (or ideal) intended value for a specified parameter. Tolerances are specified as positive and 

negative deviations from this value.

Nominal Size. 

Standard size for a bar code symbol. Most UPC/EAN codes are used over a range of magnifications 

(e.g., from 0.80 to 2.00 of nominal).

NVM. 

Non-Volatile Memory.

O

ODI. 

See 

Open Data-Link Interface

.

Open Data-Link Interface (ODI). 

Novell’s driver specification for an interface between network hardware and 

higher-level protocols. It supports multiple protocols on a single NIC (Network Interface Controller). It is capable of 
understanding and translating any network information or request sent by any other ODI-compatible protocol into 
something a NetWare client can understand and process.

Open System Authentication. 

Open System authentication is a null authentication algorithm.

P

PAN . 

Personal area network. Using Bluetooth wireless technology, PANs enable devices to communicate wirelessly. 

Generally, a wireless PAN consists of a dynamic group of less than 255 devices that communicate within about a 
33-foot range. Only devices within this limited area typically participate in the network. 

Parameter. 

A variable that can have different values assigned to it.

PC Card. 

A plug-in expansion card for laptop computers and other devices, also called a PCMCIA card. PC Cards are 

85.6mm long x 54 mm wide, and have a 68 pin connector. There are several different kinds:

•

Type I; 3.3 mm high; use - RAM or Flash RAM

•

Type II; 5 mm high; use - modems, LAN adaptors

•

Type III; 10.5 high; use - Hard Disks

PCMCIA. 

Personal Computer Memory Card Interface Association. See 

PC Card

.

Summary of Contents for DS9208

























































































































































































































































































































































































































































Reviews:

No comments