manualshive.com logo in svg

Motorola DS9208, Product Reference Manual, Page: 4 / 440

Share
Download
Motorola DS9208 Product Reference Manual Download Page 4

ii

DS9208 Product Reference Guide

© 2015 Symbol Technologies, Inc.

No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, 
without permission in writing from Zebra. This includes electronic or mechanical means, such as photocopying, 
recording, or information storage and retrieval systems. The material in this manual is subject to change 
without notice.

The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on 
a licensed basis. Zebra grants to the user a non-transferable and non-exclusive license to use each software 
or firmware program delivered hereunder (licensed program). Except as noted below, such license may not be 
assigned, sublicensed, or otherwise transferred by the user without prior written consent of Zebra. No right to 
copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall 
not modify, merge, or incorporate any form or portion of a licensed program with other program material, create 
a derivative work from a licensed program, or use a licensed program in a network without written permission 
from Zebra. The user agrees to maintain Zebra’s copyright notice on the licensed programs delivered 
hereunder, and to include the same on any authorized copies it makes, in whole or in part. The user agrees not 
to decompile, disassemble, decode, or reverse engineer any licensed program delivered to the user or any 
portion thereof.

Zebra reserves the right to make changes to any software or product to improve reliability, function, or design.

Zebra does not assume any product liability arising out of, or in connection with, the application or use of any 
product, circuit, or application described herein.

No license is granted, either expressly or by implication, estoppel, or otherwise under any Zebra Technologies 
Corporation, intellectual property rights. An implied license only exists for equipment, circuits, and subsystems 
contained in Zebra products.

Zebra and the Zebra head graphic are registered trademarks of ZIH Corp. The Symbol logo is a registered 
trademark of Symbol Technologies, Inc., a Zebra Technologies company.

Zebra Technologies Corporation
Lincolnshire, IL U.S.A.

http://www.zebra.com

Warranty

For the complete Zebra hardware product warranty statement, go to: 

http://www.zebra.com/warranty

.

Summary of Contents for DS9208

























































































































































































































































































































































































































































Reviews:

No comments