manualshive.com logo in svg

Motorola DS9208, Product Reference Manual, Page: 142 / 440

Share
Download
Motorola DS9208 Product Reference Manual Download Page 142

7 - 2

DS9208 Product Reference Guide

Connecting an RS-232 Interface

Connect the digital scanner directly to the host computer.

Figure 7-1    

RS-232 Direct Connection

1.

Attach the modular connector of the RS-232 interface cable to the cable interface port on the digital 
scanner (see 

Installing the Interface Cable on page 1-3

).

2.

Connect the other end of the RS-232 interface cable to the serial port on the host.

3.

Connect the power supply to the serial connector end of the RS-232 interface cable. Plug the power supply 
into an appropriate outlet.

4.

Select the RS-232 host type by scanning the appropriate bar code from 

RS-232 Host Types on page 7-6

.

5.

To modify any other parameter options, scan the appropriate bar codes in this chapter.

Interface Cable

Serial Port

Connector to Host

Power Supply Cable

NOTE

Interface cables vary depending on configuration. The connectors illustrated in 

Figure 7-1

 are examples 

only. The connectors may be different than those illustrated, but the steps to connect the digital scanner 
are the same.

Summary of Contents for DS9208

























































































































































































































































































































































































































































Reviews:

No comments