Motorola DS3508 Product Reference Manual Download

Page: 32 / 386

2 - 4

DS3508 Product Reference Guide

LED Definitions

In addition to beep sequences, the digital scanner uses a two-color LED to indicate status.

Table 2-2

defines LED

colors that display during scanning.

Table 2-2

Standard LED Definitions

LED

Indication

Hand-Held Scanning Standard Use

Green

A bar code was successfully decoded.

Red

Transmission error, conversion or format error, or RS-232 receive error.

Off

No power is applied to the digital scanner, or the scanner is on and ready to scan.

Presentation (Hands-Free) Scanning Standard Use

Green

The scanner is on and ready to scan.

Momentarily Off

A bar code was successfully decoded.

Red

Transmission error, conversion or format error, or RS-232 receive error.

Off

No power is applied to the digital scanner, or the scanner is in low power mode.

Parameter Programming

Green

Number expected. Enter value using numeric bar codes.

Successful program exit with change in parameter setting.

Red

Input error: incorrect bar code, programming sequence, or Cancel scanned.

ADF Programming

Green

Enter another digit. Add leading zeros to the front if necessary.

Enter another alphabetic character or scan the End of Message bar code.

All criteria or actions cleared for current rule, continue entering rule.

Delete last saved rule. The current rule is left intact.

All rules deleted.

Blinking Green

Enter another criterion or action, or scan the Save Rule bar code.

Green after Blinking

Rule saved. Rule entry mode exited.

Cancel rule entry. Rule entry mode exited because of an error or the user asked to exit
rule entry.

Red

Out of rule memory. Erase some existing rules, then try to save rule again.

Entry error, wrong bar code scanned, or criteria/action list is too long for a rule. Re-enter
criterion or action.

Summary of Contents for DS3508



































































































































































































































































































































































































Search results

Summary of Contents for DS3508

Reviews:

Related manuals for DS3508

Brands by name

Popular brands

Motorola DS3508, Product Reference Manual

Search results

Summary of Contents for DS3508

Reviews:

Related manuals for DS3508

Brands by name

Popular brands