Motorola DCT5100 Page 75 User Manual Download | Manualshive

Page: 75 / 81

background image

Diagnostics 4-35

DCT5100 Installation Manual

UPM

The UPM is the upstream modem address. The value used for the UPM is the same as the
terminal ID assigned by the DAC 6000. The UPM is a unique, system-generated, eight-digit
integer between 1 and 16777215.

00000000

is displayed when the UPM is not configured or unknown.

UPSTREAM ID

The UPSTREAM ID is a set-top transmission parameter assigned by the DAC 6000 for the
interactive set-top. The UPSTREAM ID is a four-digit decimal value ranging from 0000 to 9999.

0000

is displayed if the UPSTREAM ID is not configured or unknown.

DOWNSTREAM ID

The DOWNSTREAM ID is a set-top transmission parameter assigned by the DAC 6000 for the
interactive set-top. The DOWNSTREAM ID is a four-digit decimal value ranging from 0000 to
9999.

0000

is displayed if the DOWNSTREAM ID is not configured or unknown.

STATE

The STATE parameter indicates the interactive status of the set-top:

LED OSD

State

Description

U UNCONFIG

Set-top is not configured for the interactive system and
platform should run as Pre-Interactive.

C MAC_CONNECT

Set-top is waiting to establish connection to MAC Pid Stream.

I dc

INIT_WAIT_DC_OR_C

Set-top is running in the interactive initialization state and
waiting for the default configuration or the contention channel
list messages.

I L

WAIT_LM_ACK

Set-top is running in the interactive initialization state and
waiting for Link Management Response ACK for Local
Address Message.

I SO

WAIT_SO_ACK

Set-top is running in the interactive initialization state and
waiting for a Sign On acknowledgement.

I LA

WAIT_LA_OR_SO

Set-top is running in the interactive initialization state and
waiting for Logical Address or Sign On with verification
Frequency message.

S I

INIT_STOPPED

Set-top is in the interactive initialization state and the
TransMode has stopped.

r dc

RUN_WAIT_DC_OR_C

Set-top is running in the interactive state and waiting for the
default configuration or the contention channel list messages.

r

RUNNING

Set-top interactive state is running, sending idle messages,
and waiting for any Prepare for Poll or MAC messages.

S RUN_STOPPED

Set-top interactive run state has stopped and set-top is
waiting for status or transmission control message.

00 INVALID

Set-top interactive state is unknown or invalid.

«
...
73
74
75
76
77
...
»

Summary of Contents for DCT5100


















































































Reviews:

No comments

Related manuals for DCT5100

Brand: caberQU Pages: 12

Brand: Tripp Lite Pages: 2

Brand: IKEA Pages: 64

Brand: Black Box Pages: 30

Brand: Nady Audio Pages: 3

Brand: TKF Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands