Installation
3-17
DCT5100 Installation Manual
Operational Check
The operational check tests the communication link between the remote control and the
DCT5100. Table 3-3 lists the operational check procedures:
Table 3-3
Operational check
Feature
Testing Procedure
Power on
Press
POWER
to turn on the DCT5100.
Tune to the output channel of the DCT5100 (channel 3 or 4).
Channel Selection
Scan through the channels using the
CHANNEL
+ or
- keys.
Tune to several channels by entering the channel number using the numeric keys.
Volume Control
Press
VOLUME
+ or - on the remote control to increase the volume to its upper limit,
lowest level, and to a comfortable level.
Press
MUTE
to turn the sound off. Press
MUTE
again to restore the sound.
If the DCT5100 does not operate properly, refer to Section 5, “Troubleshooting”.
