Instructions ACE reel box
ACE-GL-ACE reel box-v01-e
date :
21-08-2018
Spinnerstraat 15 | P.O. Box 6 | 7481 KJ Haaksbergen | the Netherlands | Phone: +31(0)53 573 22 55 | Email: [email protected]
1/2
Subject to technical modifications | No rights can be derived from this information
The ACE reel box is an integrated solution of a coiled cable and a protective cardboard housing. During installation the
cable can be pulled from the reel and out of the box. The numbers on the box refer to the instruction of this document.
Do not open the cardboard box before the complete cable is unwind from the reel inside the box.
Top view of the box
Front view of the box
At the front side of the box you will find besides the QR code of
these instructions, also access to the cable.
Remove the cardboard surrounding area of
.
The surrounding surface of the
marker can be
taken out of the cardboard box. Accessories for
installation (like screws, wall mounting plate, plugs) are
now accessible and can be taken out.
Preparations prior to the actual cable installation can
be carried out.
After the plugs, screws / wall mount plate are installed,
the reel inside the box can be unlocked by removing
the surface around the
marker.
The reel can now freely turn inside the box.
A piece of cable is accessible, pull gently on the right side of the
cable.
Both the end of the cable as well as the looped pulling rope are
released and can be used to pull the cable. The cable must be
uncoiled completely from the reel. To prevent the box from
moving around, a support flap is available on the bottom of the
box.
3
1
2
