3-2
Installation
DCT1800 Installation Manual
Standard Cabling Diagram
The DCT1800 will output on either channel 3 or 4 depending on the configuration message from
the control system. Figure 3-1 illustrates a standard diagram connecting the DCT1800 to a TV
using RF connectors:
Figure 3-1
Standard cabling
R
RF IN
CABLE IN
TO RF IN
TV Pass Card
AUDIO OUT
VIDEO
TO
TV/VCR
L
DCT1800
TV
CABLE IN
VIDEO
IN
SVIDEO
IN
AUDIO
IN
L
R
AUDIO
OUT
L
R
From cable outlet
The remodulated channel, 3 or 4, does not carry stereo for digital channels. To receive stereo,
connect the DCT1800 using RCA baseband connectors. These connections are illustrated later in
this section.
