40
Communications Gateway User Guide
X
Home
Exit
Introduction
Before You Begin
Installation & Configuration
FAQ
Troubleshooting
Glossary
License
Verifying the IP Address in Windows 95,
98, or Me
The following instructions are for Windows 95, 98, or Me. For information about
Windows 2000 or XP, see
“Verifying the IP Address in Windows 2000 or XP”
on
page 41. For a Macintosh or UNIX system, refer to your user guide.
To check the IP address:
1
On the Windows Desktop, click
Start
.
2
Select
Run
. The Run window is displayed.
3
Type
winipcfg.exe
and click
OK.
A window similar to the example at top left is
displayed.
4
Select your adapter name — the Ethernet card or USB device.
5
Click
Renew
.
6
Click
OK
after the system displays an IP address.
If after performing this procedure your computer cannot access the Internet, call your
service provider for help.
The values for Adapter Address, IP Address,
Subnet Mask, and Default Gateway on your PC
will be different than in the image above.
In Windows 98, if autoconfiguration is displayed
before IP Address, call your service provider.
Summary of Contents for Communications Gateway
Page 82: ...493049 001 3 02 English MGBI ...