Motorola ATS 2500p User Manual Download Page 97 | Manualshive

Page: 97 / 100

background image

MOTOROLA SOLUTIONS offers the following optional
extended service contracts.

SERVICE FROM THE START (SfS) COMPREHENSIVE

Provides for extended hardware repair coverage
INCLUDING CHEMICAL, LIQUID, FIRE, AND OTHER
PHYSICAL DAMAGE. Comprehensive coverage is
available in conjunction with MOTOROLA SOLUTIONS’S
standard Commercial Warranty and starts from the FIRST
DAY the radio is put into use. Service performed under this
plan consists of repair or replacement of the covered
equipment as set forth in the terms and conditions. Repairs
will be made only at the designated MOTOROLA
SOLUTIONS repair depot. Local services are not included.
MOTOROLA SOLUTIONS will pay the inbound shipping
charges only with use of the MOTOROLA SOLUTIONS
designated delivery service. MOTOROLA SOLUTIONS will
pay for outbound shipping via MOTOROLA SOLUTIONS'S
normal shipping methods.

SERVICE FROM THE START (SfS) LITE

Provides extended hardware normal wear and tear repair
coverage beginning AFTER MOTOROLA SOLUTIONS’S
standard Commercial Warranty period expires. Service
performed under this plan consists of repair of the covered
equipment as set forth in the terms and conditions. Repairs
will be made only at the designated MOTOROLA

SOLUTIONS repair depot. Local services are not included.
MOTOROLA SOLUTIONS will pay for outbound shipping
via MOTOROLA SOLUTIONS'S normal shipping methods.

II. GENERAL PROVISIONS:

This warranty sets forth the full extent of MOTOROLA
SOLUTIONS'S responsibilities regarding the Product.
Repair, replacement or refund of the purchase price, at
MOTOROLA SOLUTIONS’s option, is the exclusive
remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL
OTHER EXPRESS WARRANTIES. IMPLIED
WARRANTIES, INCLUDING WITHOUT LIMITATION,
IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED
TO THE DURATION OF THIS LIMITED WARRANTY. IN
NO EVENT SHALL MOTOROLA SOLUTIONS BE LIABLE
FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE
OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF
TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST
PROFITS OR SAVINGS OR OTHER INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE SUCH
PRODUCT, TO THE FULL EXTENT SUCH MAY BE
DISCLAIMED BY LAW.

English

97

«
...
95
96
97
98
99
...
»

Summary of Contents for ATS 2500p





































































































Reviews:

No comments

Related manuals for ATS 2500p

LUNCHBOX LB-100

Brand: Sangean Pages: 1

Brand: Garmin Pages: 2

Brand: Eton Pages: 18

Brand: Zamel Pages: 60

Brand: YEONHWA M TECH Pages: 23

Brand: Icom Pages: 64

Brand: MAJORITY Pages: 20

Brand: Clatronic Pages: 14

Brand: ApexRadio Pages: 2

Brand: Maxon Pages: 9

Brand: Emerson Pages: 4

MICROTALK CX105C

Brand: Cobra Pages: 1

Brand: Cobra Pages: 14

Brand: GE Pages: 12

Brand: Makita Pages: 28

Brand: Makita Pages: 14

Brand: Makita Pages: 32

Brand: Makita Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands