Motorola ATS 2500p User Manual Download Page 4

Page: 4 / 100

Making a Priority Dispatch Calls............. 54
Dynamic Zone Programming (DZP)....... 55

Entering the Dynamic Zone to
Select a Dynamic Channel...........55
Saving a Channel in the
Dynamic Zone from List
Selection...................................... 56
Saving a Channel in the
Dynamic Zone from Channel
Name........................................... 56
Deleting a Channel in the
Dynamic Zone..............................57

Contacts............................................................ 57

Adding a New Contact Entry...................58
Deleting a Contact Entry.........................59
Adding a Contact to a Call List............... 60
Removing a Contact from a Call List...... 60
Methods of Contact Editing in a Call
List.......................................................... 61

Editing an Entry Alias...................61
Editing as Entry ID....................... 61
Editing a Call Type.......................62

Viewing Details of a Contact...................62

Scan Lists.......................................................... 63

Intelligent Priority Scan........................... 63
Viewing a Scan List................................ 63
Editing the Scan List............................... 64
Changing the Scan List Status............... 65
Viewing and Changing the Priority
Status......................................................65

Scan.................................................................. 66

Turning Scan On or Off...........................66
Making a Dynamic Priority Change
(Conventional Scan Only).......................66
Deleting a Nuisance Channel................. 67
Restoring a Nuisance Channel............... 67

Call Alert Paging................................................67

Receiving a Call Alert Page.................... 67
Sending a Call Alert Page.......................68

Emergency Operation........................................69

Exiting Emergency..................................70
Exiting Emergency as Supervisor...........70
Sending an Emergency Alarm................ 71
Sending an Emergency Alarm with
Emergency Call...................................... 72

English

Summary of Contents for ATS 2500p




































































































Search results

Summary of Contents for ATS 2500p

Reviews:

Related manuals for ATS 2500p

Brands by name

Popular brands

Motorola ATS 2500p, User Manual

Search results

Summary of Contents for ATS 2500p

Reviews:

Related manuals for ATS 2500p

Brands by name

Popular brands