Motorola ATS 2500p User Manual Download Page 83

Page: 83 / 100

Digital Options

One or more of the following options may be
preprogrammed in your radio. Check with your dealer or
system administrator for more information.

Option

Result

Digital Carrier-Operated
Squelch (COS)

You hear any digital traf-
fic.

Normal Squelch

You hear any digital traffic
having the correct net-
work access code.

Selective Switch

You hear any digital traffic
having the correct net-
work access code and
correct talkgroup.

Using the PL Defeat Feature

This feature allows you to override any coded squelch
(DPL or PL) that might be preprogrammed to a channel.

The radio also unmutes to any digital activity on a digital
channel.

Digital PTT ID Support

This feature allows you to see the radio ID (number) of the
radio from whom you are currently receiving a
transmission. This ID, consisting up to a maximum of eight
characters, can be viewed by both the receiving radio and
the dispatcher.

The ID number of your radio is also automatically sent
every time the

PTT

button is pressed. This is a per-channel

feature. For digital voice transmissions, the ID of your radio
is sent continuously during the voice message.

Smart PTT Feature (Conventional Only)

Smart

PTT

is a per-personality, programmable feature used

in conventional radio systems to keep radio users from
talking over other radio conversations.

When smart

PTT

is enabled in your radio, you cannot

transmit on an active channel.

If you try to transmit on an active smart-

PTT

channel, you

hear an alert tone, and the transmission is inhibited. The

English

Summary of Contents for ATS 2500p




































































































Search results

Summary of Contents for ATS 2500p

Reviews:

Related manuals for ATS 2500p

Brands by name

Popular brands

Motorola ATS 2500p, User Manual

Search results

Summary of Contents for ATS 2500p

Reviews:

Related manuals for ATS 2500p

Brands by name

Popular brands