Motorola APX8500 Manual Download

Page: 93 / 273

NEXT >

< PREV

CONTENTS

ADVANCED FEATURES

Advanced Call Features

Requesting a Reprogram (Trunking Only)

This feature allows you to notify the dispatcher when you want a new dynamic regrouping assignment.

Procedure:

[Preprogrammed Button]

Press the preprogrammed

Reprogram Request

button to send reprogram request to the dispatcher.

The display shows

Reprgrm rqst

and

Please wait

If you hear five beeps, the dispatcher has acknowledged the reprogram request.

The display shows

Ack received

and the radio returns to the home screen.

If the dispatcher does not acknowledge the reprogram request within six seconds, you hear a low-pitched alert
tone and the display shows

No acknowledge

Try again or press the

Home

button to cancel and return to the home screen.

Summary of Contents for APX8500


















































































































































































































































































Search results

Summary of Contents for APX8500

Reviews:

Related manuals for APX8500

Brands by name

Popular brands

Motorola APX8500, Manual

Search results

Summary of Contents for APX8500

Reviews:

Related manuals for APX8500

Brands by name

Popular brands