Motorola APX8500 Manual Download

Page: 131 / 273

NEXT >

< PREV

CONTENTS

ADVANCED FEATURES

Emergency Operation

Special Considerations for Emergencies

131

•

If you press the

Emergency

button while in a channel that has no emergency capability, a low-pitched tone

sounds.

•

If you change to a channel/mode with no Emergency capability while in Emergency operation, the following
occurs:

–

The display shows

NO EMERGENCY

–

A continuous low-pitched tone sounds until you select a valid Emergency channel/mode or until you
disable the Emergency operation.

•

If you change to a channel/mode with Emergency capability while in Emergency operation, the Emergency
Alarm and/or Emergency Call continues on the new channel/mode.

•

If the radio is out-of-range of the system or the emergency alarm is not acknowledged, a tone sounds and
the display shows

No acknowledge

Summary of Contents for APX8500


















































































































































































































































































Search results

Summary of Contents for APX8500

Reviews:

Related manuals for APX8500

Brands by name

Popular brands

Motorola APX8500, Manual

Search results

Summary of Contents for APX8500

Reviews:

Related manuals for APX8500

Brands by name

Popular brands