4.4
Using the Carry Holder
Procedure:
1
To insert the radio into the carry holder, perform the following actions:
a
Position the radio within the carry holder with the main speaker facing outward.
b
Slide the radio down into the carry holder until it clicks in place.
2
To remove the radio from the carry holder, perform the following actions:
a
Place the tip of your fingers on the ledge of the carry holder.
b
Push the bottom of the radio until it is released from the carry holder.
4.5
Charging the Radio
Prerequisites:
WARNING:
To avoid possible explosion:
• Do
not
replace the battery in any area labeled
Hazardous Atmosphere
.
• Do
not
discard batteries in a fire.
Procedure:
1
Turn off the radio while charging in a single or multi-unit charger.
2
Place the radio in a Motorola Solutions-approved charger.
NOTE:
If the radio must remain powered on in the multi-unit charger, LMR PTT is not
allowed as possible degradation in performance may occur.
4.6
Turning the Radio On or Off
Turning the Radio On
Prerequisites:
Ensure that the battery is fully charged before the first use.
Procedure:
Rotate the
On/Off/Volume Control Knob
clockwise until you hear a click.
MN005642A01-AN
Chapter 4 : Getting Started
28
