Motorola APX NEXT User Manual Download Page 94

Page: 94 / 119

• To search for a recipient, tap

More

→

Search

→

<required recipient>

• To select an online recipient from an alphabetical order list, tap

More

→

Sort by

presence

→

<required recipient>

• To select a recipient from an alphabetical order list, tap

More

→

Sort by

name

→

<required recipient>

25.8

Managing Messages

Procedure:

From the

Home

screen, tap

All Messages

Perform one of the following actions:

Option

Actions

Copying and pasting messages

Tap and hold the required message, then
tap

Copy

Tap and hold the message input field,
then tap

Paste

NOTE:

Only text messages can

be copied and pasted.

Forwarding messages

Tap and hold the required message.

Tap

Forward

Tap the required recipient.

25.9

Deleting Selected Messages

Procedure:

From

All Messages

, perform one of the following actions:

• To delete a message, tap and hold the required message.

• To delete more than one message, tap

More

→

Select to Delete

→

<required

message>

Tap

Delete

MN005642A01-AN
Chapter 25 : SmartMessaging

Summary of Contents for APX NEXT























































































































Search results

Summary of Contents for APX NEXT

Reviews:

Related manuals for APX NEXT

Brands by name

Popular brands

Motorola APX NEXT, User Manual

Search results

Summary of Contents for APX NEXT

Reviews:

Related manuals for APX NEXT

Brands by name

Popular brands