7.2.3
Deleting Nuisance Channels
If a channel continually generates unwanted calls or noise (termed “nuisance” channel), you can
temporarily remove the unwanted channel from the scan list. This capability does not apply to priority
channels or the designated transmit channel.
Procedure:
From the
Home
screen, tap
Nuis Del
.
7.2.4
Restoring a Nuisance Channel
Procedure:
To restore the deleted nuisance channel, perform one of the following actions:
• Stop and restart a scan.
• Mode change to another channel and back to the original channel.
• Turn off the radio and then turn it on again.
7.5
Selecting Channels
Procedure:
Use one the following methods to select a channel:
If…
Then…
Rotate the
Channel Selector
to the required position.
a
From the
Home
screen, tap the
Radio Control Widget
.
b
Perform one of the following actions:
a
On the
Channel
tab, select the required channel.
b
On the
Recents
tab, select the recently used zone and
channel.
c
To search for the required channel, tap
Search
.
7.5.1
Channel Error Messages
If there is a channel error, your radio displays error messages on the Radio Control Widget.
Type
Description
Unprogrammed
The mode is set to an unprogrammed channel.
Fail 001
The selected channel is assigned to an incorrect frequency band.
MN005642A01-AN
Chapter 7 : General Radio Operation
45
