manualshive.com logo in svg

Motorola APX 3000, User Manual

Share
Download
Motorola APX 3000 User Manual Download Page 64

Analog Options

Tone Private Line, Digital Private-Line, and carrier squelch is available (preprogrammed) per channel.

Option

Result

Carrier squelch

You hear all traffic on a channel.

Tone Private Line or Digital Private-Line

The radio responds only to your messages.

Digital Options

One or more of the following options may be preprogrammed in your radio. Contact your system
administrator for more information.

Option

Result

Digital Carrier-Operated Squelch

You hear all digital traffic.

Normal Squelch

You hear any digital traffic having the correct
network access code.

Selective Switch

You hear any digital traffic having the correct
network access code and correct talkgroup.

7.19.7

Digital PTT ID Support ‡

This feature allows you to see the radio ID (number) of the radio from whom you are currently receiving
a transmission. The receiving radio and the dispatcher can view the ID, which consists of up to a
maximum of eight characters.

The ID number of your radio is also automatically sent every time you press the 

PTT

 button. This

feature is preprogrammed per channel. For digital voice transmissions, the ID of your radio is sent
continuously during the voice message.

7.19.8

Smart PTT (Conventional Only)

Smart PTT is a per-personality, programmable feature used to keep radio users from talking over
other radio conversations. When Smart PTT is enabled in your radio, you cannot transmit on an active
channel.

The following table shows the variations of Smart PTT.

Mode

Description

Transmit Inhibit on Busy Channel with Carrier

You cannot transmit if traffic is detected on the
channel.

Transmit Inhibit on Busy Channel with Wrong
Squelch Code

You cannot transmit on an active channel with a
squelch code or (if secure-equipped) encryption
key other than your own. If the PL code is the
same as yours, the transmission is not preven-
ted.

Quick-Key Override

Your radio must be preprogrammed to allow
you to use Quick-Key Override. This feature
works with either one of the two above varia-

68012007043-EM
Chapter 7 :  Advanced Features

64  

Summary of Contents for APX 3000



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands