5
Tighten by rotating the thumbscrew clockwise by hand.
2.5
Installing Accessories with GCAI Connector
Procedure:
Perform one of the following actions:
• Connect a Global Common Accessory Interface (GCAI) DRSM to see the icons and strings
as well as hear audio alerts and transmission of your radio
• Connect a GCAI Surveillance Earpieces to hear the audio alerts.
2.6
Turning On the Radio‡
Procedure:
1
Push the On/Off Switch to turn the power on or off.
• If the power-up test is successful, the display shows
SELFTEST
momentarily, followed by the
Home screen and the Codeplug Alias.
You see a green spot when the switch is in the ON position. If the power-up test is successful,
you see momentary
MOTOROLA
on the DRSM.
NOTE:
If the power-up test is unsuccessful, you see
ER XX/YY
(
XX/YY
is an alphanumeric
code) on your DRSM screen. Turn off your radio, check the battery, and turn on your
radio.
If your radio fails the power-up test again, record the
ER XX/YY
code and contact your
dealer.
2
To turn off your radio, push the
On/Off Switch
until you do not see the green spot.
2.7
Adjusting the Volume†
Procedure:
1
Press the
Up
and
Down Arrow Button
to adjust the volume you hear on your headset.
Refer to your agent or qualified radio technician if you must enable the Up and Down Arrow
Button with other function.
NOTE:
Ensure the Up and Down Arrow Button is in Volume mode by pressing the Multi-Function
Button (MFB) to toggle to Volume mode.
MFB must be preprogrammed to be a programmable button.
2.8
Pairing Radio with Pod and Earpiece†‡
Procedure:
1
Plug the earpiece to the wireless Pod.
68012007043-EM
Chapter 2 : Preparing Your Radio for Use
16
