manualshive.com logo in svg

Motorola APX 3000, User Manual

Share
Download
Motorola APX 3000 User Manual Download Page 48

7.8.2

Emergency Keep-Alive

This feature prevents the radio from being turned off when it is in Emergency mode. If this feature is
enabled, you are required to exit Emergency mode before turning off your radio.

7.8.3

Exiting Emergency Operation

If an Emergency operation is triggered on your radio, the dispatch console or radios configured as
Supervisor can exit the Emergency operation.

Procedure:

To exit Emergency operation, press and hold the programmed 

Emergency

 button.

7.8.4

Exiting Emergency as Supervisor (Trunking Only)

Radios configured as Supervisor are able to cancel emergency mode of other radios. The dispatch
console must be preprogrammed to use this feature. Contact your system administrator for more
information.

Procedure:

1

Perform one of the following actions:

If…

Then…

If the emergency mode is ini-
tiated by other radios,

press and hold the 

Top Side

 button and press the 

Emer-

gency

 button.

If the emergency mode is ini-
tiated by the Supervisor,

Perform one of the following actions:

• Press and hold the 

Emergency

 button.

• Press and hold the 

Top Side

 button, and press the

Emergency

 button.

• Wait for console to clear emergency.

NOTE: 

The combinations of the following buttons are supported in your radio:

• Radio 

Top Side

 button and 

Top

 button.

• Radio 

Top Side

 button and accessory 

Orange

 button.

• Accessory 

1-Dot Button

 and radio 

Top

 button.

• Accessory 

1-Dot Button

 and accessory 

Orange

 button.

68012007043-EM
Chapter 7 :  Advanced Features

48  

Summary of Contents for APX 3000



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands