manualshive.com logo in svg

Motorola APX 3000, User Manual

Share
Download
Motorola APX 3000 User Manual Download Page 62

7.18

Site Selectable Alerts (ASTRO 25 Trunking) †‡

A Site Selectable Alert (SSA) is an Intelligent Lighting indicator with audio alert. The alert is sent to
radios at sites to notify the users when special situations occur.

Your radio supports up to 250 site aliases. Only authorized radios are enabled to send SSA.

NOTE:

The alert alias, alert tone, and alert period are configured in the Customer Programming
Software. Contact your system administrator for more information.

The SSA alert volume is reduced when voice audio is received at the same time. It is important
that the SSA audio file is created with clear loud audio to ensure audio clarity at reduced levels.

7.19

Utilities

This chapter explains the operations of the utility functions available in your radio.

7.19.1

Using the Flip Display

When and where to use:

 This feature allows you to reverse the content of your DRSM display upside

down.

Procedure:

To flip the display, press and hold the preprogrammed 

Light/Flip

 button.

7.19.2

Controlling the Display Backlight

When and where to use:

 You can enable or disable your DRSM display backlight as needed, if poor

light conditions make the display difficult to read.

NOTE:

The backlight remains on for a preprogrammed time before it automatically turns off completely
or returns to the minimum backlight level.

Procedure:

Perform one of the following actions:

• To toggle the backlight on or off, press the preprogrammed 

Light/Flip

 button.

• To turn the backlight on, press any programmable radio controls or buttons.

7.19.3

Locking and Unlocking the Controls†‡

When and where to use:

 This function can be preprogrammed as a short press or long press per your

request. Check with your dealer or qualified technician for best selection to suit your usage.

Procedure:

1

Long press the preprogrammed Control Lock button to lock the controls.

If preprogrammed, the radio plays the associated Voice Announcement.The display shows

CTRL LCK

.

68012007043-EM
Chapter 7 :  Advanced Features

62  

Summary of Contents for APX 3000



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands