Installation Guide
37
maximum RF signal strength that can be transmitted. This is a required parameter.
•
Time Zone
- Set the time zone where the access point is deployed. This is a required parameter. The
setting should be complimentary with the selected deployment country.
27. If an NTP resource is unavailable, set the
System Date and Time
(calendar date, time and AM/PM
designation).
28. Optionally enter the IP address of a server used to provide system time to the access point. Once the IP
address is entered, the
Network Time Protocol (NTP)
functionality is engaged automatically for
synchronization with the NTP resource.
29. If an NTP resource is unavailable, set the
System Date and Time
(calendar date, time and AM/PM
designation).
30. Optionally enter the IP address of a server used to provide system time to the access point. Once the IP
address is entered, the
Network Time Protocol (NTP)
functionality is engaged automatically for
synchronization with the NTP resource.
31. Select
Next
. The Initial AP Setup Wizard displays the
Summary and Commit
screen to summarize the
screens (pages) and settings updated using the Initial AP Setup Wizard.
Summary of Contents for AP6562
Page 1: ...AP6562 Access Point INSTALLATION GUIDE ...
Page 2: ...2 AP6562 Access Point ...
Page 58: ...58 AP6562 Access Point ...
Page 59: ...Installation Guide 59 ...
