6
AP6562 Access Point
1
Introduction
The AP6562 access point, a component of the Motorola Solutions wireless controller system, links wireless
802.11abgn devices, enabling the growth of your wireless network with a cost effective alternative to standard
access points. The AP6562 access point provides multiple deployment options.
The AP6562 access point receives all power and transfers data through the same CAT-5 or better Ethernet cable.
An 802.3at Ethernet switch or power supply (specifically rated for the AP6562) is required.
An AP6562 model access point uses WiNG 5 software as its onboard operating system. The access point’s unique
WiNG 5 software enables the access point to function as either a Virtual Controller AP capable of adopting and
managing up to 24 additional AP6562 access points or a Standalone access point managed by its connected
controller.
If new to Motorola Solutions access point technology, refer to the
WiNG Access Point System Reference Guide
to
familiarize yourself with access point technology and the feature set supported by the WiNG operating system.
The guide is available, at
http://supportcentral.motorola.com/support/product/manuals.do
.
The AP6562 access point is approved under MODEL: AP-6562.
This document is written for the qualified network device installer.
1.1 Document Conventions
The following graphical alerts are used in this document to indicate notable situations:
NOTE
Tips, hints, or special requirements that you should take note of.
CAUTION
Care is required. Disregarding a caution can result in data loss or
equipment malfunction.
WARNING!
Indicates a condition or procedure that could result in personal injury or
equipment damage.
!
Summary of Contents for AP6562
Page 1: ...AP6562 Access Point INSTALLATION GUIDE ...
Page 2: ...2 AP6562 Access Point ...
Page 58: ...58 AP6562 Access Point ...
Page 59: ...Installation Guide 59 ...
