16 Getting Started
After inserting the SIM card, turn on the device. If the SIM card is inserted in the wrong way round,
damaged or there is no SIM, the Check Card message may be displayed. Remove the SIM card,
check that it is the right way round and then re-insert it into the phone. If either of the Bad Card
See Supplier, or Blocked See Supplier messages are displayed, then you will need to contact your
Cellular Service Provider.
Installing the Battery
Before you can use your device, you need to install and charge the battery. Your phone is designed
to be used only with Motorola Original Batteries and accessories. We recommend that you store
batteries in their protective cases when not in use.
1
Remove the battery from its protective plastic case.
2
If the device's battery door is already in place, push down the battery door release latch, then
slide the door down and lift off.
3
Insert the battery, printed arrows first, into the compartment. Align the connections on the
battery with the connections on the device and push down.
4
Replace the battery door then slide the door up until it clicks into place.
Summary of Contents for A008
