![Motorola solutions Avigilon VMA-AIA1-CG1 User Manual Download Page 19](http://html1.mh-extra.com/html/motorola-solutions/avigilon-vma-aia1-cg1/avigilon-vma-aia1-cg1_user-manual_1839271019.webp)
l
DHCP
to automatically use the existing NTP servers in the network.
l
Manual
to enter the address of NTP servers in the Servers list. Controls to add and
delete addresses in the list, and reorder them are activated.
l
Off
if you do not use an NTP server.
Note:
The default set of NTP servers is always present in the Servers list. The default
list cannot be rearranged or deleted:
l
0.pool.ntp.org
l
1.pool.ntp.org
l
2.pool.ntp.org
l
3.pool.ntp.org
Click
Apply
to save the time settings.
l
Upgrade Firmware
pane to install the latest version of the firmware on your device, or to reinstall the
firmware if it becomes corrupted. For more information, see
l
Certificates
pane to manage the certificates used by the ACC ES Admin Web UI and the device. For
more information, see
.
Connecting the Device to Users and Cameras
On the Network panel, you can change network connections of the appliance. Four network connections
are supported. Any of the network connections can be used to join the Avigilon AI Appliance to an existing
ACC site. The appliance must be on a network where it can be discovered by the ACC Client and can be
clustered to other ACC servers. Users who administrate the appliance through the ACC Client software
connect to the device through this network.
Important:
Before adding the appliance as a new ACC site, or merging the appliance to an existing
ACC Site, first set its IP address. It is highly recommended to be in the same IP subnet as the other
servers in the ACC Site.
The camera network is a closed network that typically only contains cameras. This reduces the amount of
interference with video recording.
You can perform any of the following actions in each of the panes in the Network panel:
To...
Do this...
Set how the
device obtains an
IP address for
In each of the panes in the Network panel, toggle
Automatic IP
on to discover
connected networks automatically (the default setting), or off to manually specify the
connections. Enter the appropriate values in the following fields if you are manually
Connecting the Device to Users and Cameras
15