2. In the
Maximum Logs
drop down list, select the number of log messages you want to display each
time.
3. Enter text in the
Filter
field to apply a filter to the log listings.
4. Click the
Sync
button to display the updated logs.
Rebooting the Device and Managing Device Settings
On the Device panel use the:
l
General
pane to:
l
Reboot
the device from the ACC ES Admin Web UI. You can monitor the progress of the
device as it reboots from the ACC ES Admin Web UI launch page (see . For more infomation
see,
Launching the ACC ES Admin Web UI
).
l
Select a
Language
for the ACC ES Admin Web UI from the drop down list.
l
Hostname
pane to enter a new
Hostname
. Click
Apply
to make the change.
The default hostname is the same as the server name. The server name is in the form
<Model>-
<Serial Number>
l
Password
pane to change the administrator password:
Note:
You cannot change the default
administrator
username on the ACC ES Admin Web UI,
only the password.
1. To change your password, confirm your identity by entering your current password in the
Old
Password
field.
2. Enter the new password in the
New Password
field.
3. Re-enter the new password in the
Confirm Password
field.
CAUTION —
You will lose configuration data if you forget your password. To reset the administrator
password, you must reset the device to the factory default settings. This will delete the configuration
data. For more information on performing a factory restore, see
Restoring to Factory Default Settings
.
l
Time
pane to customize how the device keeps time:
l
Select your
Time Zone
from the drop-down list. The time zone that you set here is used by the
recording schedules defined in the ACC Client software.
l
Select whether you want to keep synchronized time through a Network Time Protocol (NTP)
server (recommended) in the NTP field.
Select:
Rebooting the Device and Managing Device Settings
14
