At the fringe areas of reception, both voice and tone quality will start to sound "garbled" or "broken". To
correct this problem, simply position the accessory and radio closer to each other (within the 10 meter
defined range) to re-establish clear audio reception.
NOTE:
Once a COTS headset is paired to your radio, it is always connected. Therefore the
battery life of the accessory is aligned with the Talk Time power consumption, not the Standby
Time consumption.
Procedure:
Turn on the accessory. Then, place it close to the radio aligning the Bluetooth Pairing Location
(a blue dot) on the radio to the Bluetooth Pairing Location (a blue dot) on the accessory.
If the pairing process is successful, you hear an incremental-pitched tone. The radio begins to
connect to the device.
If the pairing process fails, you hear a short, low-pitched tone. The display shows
PAIRFAIL
.
Repeat this step.
The radio tries to establish connection with the device once paired.
NOTE:
If the connection fails within 6 seconds, you hear a decremental-pitched tone to indicate
that the device is unpaired. The display shows
<Device Type> UNPAIRED
. Repeat this step
to re-initiate the pairing process.
If the connection is successful, you hear an incremental-pitched tone. The display shows
<Device
Type> CONNCTED
and the Bluetooth icon turns from to
.
If the radio has the pairing record of the device and the connection fails, you hear a short, low-pitched
tone. The display shows
<Device Type> CON FAIL
.
7.19.2
Pairing with LEX Handheld
Prerequisites:
Ensure that Bluetooth feature of your radio is on and the Bluetooth tones are enabled.
Procedure:
1
Turn on the handheld and activate the Bluetooth feature.
2
Place the handheld close to the radio aligning the Bluetooth Pairing Location on the handheld
with the Bluetooth Pairing Location on the radio.
If the pairing process is successful, you hear an incremental-pitched tone from the radio. The
radio begins to connect to the handheld. If the connecting process is successful, you hear an
incremental-pitched tone. The display shows
<Device Friendly Name> connected
, and
the Bluetooth icon turns from to
.
If unsuccessful, one of the following scenarios occur:
• You hear a short, low-pitched tone and the display shows
Bluetooth pairing failed
(if
pairing fails).
• You hear a decremental-pitched tone and the display shows
<Device Friendly Name>
unpaired
(if the connection fails within 6 seconds).
MN006727A01-AE
Chapter 7 : Advanced Features
63