Depending on how your radio is programmed, if there is no answer after the maximum ring time or
when you press the
PTT
button for an Enhanced Private Call, the radio automatically sends a call alert
page.
NOTE:
This feature must be preprogrammed by a qualified radio technician.
7.6.1
Receiving a Call Alert Page
When and where to use:
When you receive a Call Alert page, you hear four repeating alert tones and
the LED blinks green. The call received icons blinks and the display shows
PAGE RCV
.
Procedure:
Press any button to clear the Call Alert page.
7.6.2
Sending a Call Alert Page
When and where to use:
Your radio must be preprogrammed for you to use this feature.
Procedure:
• Press the preprogrammed
Call Alert Paging
button to send a page to the preprogrammed ID.
If the call alert page is sent successfully, a tone sounds and the display shows the current zone
and channel name.
If the call alert page is not acknowledged, a tone sounds and the display shows the current zone
and channel name.
7.7
Recent Calls
7.7.1
Instant Recall
This feature allows you to save and playback the recent received calls. All saved calls are removed
upon radio power cycle.
7.7.1.1
Saving and Playback Calls
When and where to use:
Procedure:
• Saving the recorded calls using the preprogrammed
Record Playback
button:
a. Long press the preprogrammed
Record Playback
button to save the recorded calls.
Radio displays
Audio Saved
momentarily.
MN006727A01-AE
Chapter 7 : Advanced Features
43