7.5.2
Making a Dynamic Priority Change (Conventional Scan Only)
When and where to use:
While the radio is scanning, the dynamic priority change feature allows you to temporarily change any
channel in a scan list (except for the Priority-One channel) to the Priority-Two channel.
This change remains in effect until scan is turned off. Scan then reverts to the default setting.
Procedure:
• Making a Dynamic Priority Change using the preprogrammed
Dynamic Priority
button:
a. When the radio locks onto the channel designated as the new Priority-Two channel, press
the preprogrammed
Dynamic Priority
button.
The radio continues scanning the remaining channels in the list.
7.5.3
Deleting a Nuisance Channel
When and where to use:
If a channel continually generates unwanted calls or noise (termed “nuisance” channel), you can
temporarily remove the unwanted channel from the scan list.
This capability does not apply to priority channels or the designated transmit channel.
NOTE:
Deleting a nuisance channel is
only
possible through the preprogrammed
Nuisance
Channel Delete
button.
Procedure:
When the radio is locked onto the channel to be deleted, press the preprogrammed
Nuisance
Delete
button.
The radio continues scanning the remaining channels in the list.
7.5.4
Restoring a Nuisance Channel
Procedure:
To restore the deleted nuisance channel, perform one of the following actions:
• Stop and restart a scan.
• Mode change to another channel and back to the original channel.
• Turn off the radio and then turn it on again.
7.6
Call Alert Paging
This feature allows your radio to work like a pager.
If other users are away from their radios or if they are unable to hear their radios, you can send them
an individual call alert page. You can also verify if a radio is active on the system.
MN006727A01-AE
Chapter 7 : Advanced Features
42