11A
EN
05. TROUBLESHOOTING
Problems
Behavior
Procedure
The awning is not secure
properly on the wall.
• The screws are not suitable for the wall structure.
• Check the installation measures.
• Check that the number of screws is sufficient and that they are indicated in this manual.
The awning does not remain
level after opening.
• Changes to the tarpaulin after several maneuvers.
• Incorrect adjustment of the top or articulated arms.
• Check the level of the wall brackets.
• Check the level of the square tube.
• Correct the inclination of the arms taking into account the instructions in the manual.
The top does not close in
full.
• Defacing the top or limit switch.
• Adjust the arms.
• Adjust the top slope.
• Tune the motor limit switches.
The top does not close on
one side.
• Natural screen extension.
The awning does not work
and the motor makes no
noise.
• The motor enters thermal protection after 2 openings and 1 lock.
• Wait 20 minutes.
The awning does not work
and the motor makes no
noise.
• Protection problem.
• Check the motor connection.
• Check engine operation by connecting directly to mains.
FINAL CONSUMERS AND SPECIALIZED TECHNICIANS INSTRUCTIONS
• Open the awning.
• Place a folded plastic can in 4, on the side where the
screen changes, between the tube and the screen. If
necessary add more shims until the screen is normal. If the
latch still does not fit, fold the plastic latch further to gain
thickness and redo the same operations.
