6A
3
4
3
4
1 2
1 2
5
7
6
105
90
1
2
3
2
2
2
1
5
6
7
4
4
3
7
5
6
EN
03. INSTALLATION
FIXING ON THE WALL
The screws, bushings and washers
are not
included in the kit.
FIXING WALL SUPPORT
Identify the drilling points for the placement of the wall supports. Drill
holes with
100mm
depth and
ø20mm
.
Place the
M12
metal bushings in the holes created. Position the wall
support in the holes and apply the
M12x90
screws with their washers.
APPLY THE COFRE
Apply the holder support to
the wall bracket.
APPLY INFERIOR
PROTECTION PROFILE
Remove the screw and the cover
from one side
(see detail A).
Open the awning with the crank
at 500mm and apply the inferior
protection profile.
FIXING HOLDER SUPPORT
Attach the
ISO7380 screws (M10 x 30)
with the
washers to secure the supports.
Apply
DIN933 screws (M8x75)
with the washers and
tighten until fully secured.
Attach the profile into the slot.
Raise the profile until it is possible to tighten the
screw.
Finally, replace the cover on the sides of the cofre
with the screws.
DETAIL A
