SAFEGUARDS
ML
5
00 HYDRAULIC LIFT
1-8
safety standards are understood. Part of safety training should include
the instructions outlined in this section.
5) If ancillary equipment is to be fitted ensure this is done in accordance
with the relevant standards or EU Directives, and that all requirements
for safety are fully met.
6) Always ensure suitable qualified personnel carry out servicing and
maintenance tasks. The operator should understand the limits of their
responsibility, and the training should reinforce the importance of not
exceeding them.
7) The essential safety checks (ESC’s) serve an important function in
ensuring the motorcycle lift continues to operate in a safe manner. These
checks must be carried out according to the instructions and intervals
covered in this manual.
8) If there are any questions or doubts regarding any aspect of motorcycle
lift safety or operation or maintenance, please contact the company
shown on the front of this manual.
1-5 Safety Notices
To protect the operator or service personnel from any injuries or accidents
during operating the motorcycle lift, please read this section carefully for safe
and proper use of the motorcycle lift.
General Safeguards
1. Only qualified personnel should be allowed to operate or service this
motorcycle lift.
2. Prior to operation routine inspection should be carried out in
accordance with the procedures described in the manual.
3. When abnormal conditions not specified in this instruction manual
occur during operation, stop operation of the motorcycle lift and
contact the manufacturer specified on cover page or distributor.
4. This lift is for motorcycle use only.
