background image

SAFEGUARDS 

ML

5

00 HYDRAULIC LIFT

 1-11  

 Warning Notice 

WARNING 

Use the lift after carefully reading the instruction manual and understand 

the contents of them for safe and proper use of the motorcycle lift. 

< During preparation> 

1. This Lift is for motorcycle use only. Do not use for any other

purpose.

2. Do not use the lift whenever any of the safety devices are not

operating properly.

3. Be cautious and smooth when loading or removing motorcycles

from lift.

4. Be careful of footing when a tire, arm, or lift is wet.

< During lifting and lowering the lift > 

5. Always watch the motorcycle while operating lift to ensure that

there are no problems taking place while raising or lowering.

6. If several lifts are installed, observe the location of the switch to

be clear of any obstacles.

7. Do not lift a motorcycle exceeding the rated capacity of the lift.

8. Do not lift a motorcycle with persons or other load.

9. Check for oil or foreign material on the lift.

10. Only raise lift after verifying that motorcycle is properly

positioned.

11. Stop raising lift after it has reached maximum height.

12. When the lift raised or lowered, wait 1 or 2 seconds before the

next operation is carried out.

13. Do not shake the motorcycle during lifting and lowering of the lift.

If the motorcycle is settling to one side, stop the operation of the

lift immediately.

Summary of Contents for Moto-Lift ML500





















Reviews: