© Motor City Wash Works, Inc. 48285 Frank, Wixom Michigan 48393 U.S.A.
Phone: 248.313.0272 ▪ Fax: 248. 313.0271
8MANULDNSINS003
03-21-18
www.motorcitywashworks.com
41
Navigate
the HMI from the main menu to the different screen and confirm that all the parameters have
been entered. Use the previous examples to fill any empty field.
From
the main screen, navigate to the
PLC CLOCK
setting screen and verify the time entered. Change
time setting if required. Save any changes by pressing “
SET PLC CLOCK TO HMI CLOCK”
button like
shown below.
Pic #78 HMI Clock Settings Screen
Turn ON
the AUTO/MANUAL button in order to test
TOP WHEEL extend, water and soap valve using
“
AUTO/MANUAL CONTROL
”
screen (see picture below). The alarm will beep three times
before manually turning ON any output. Verify for air or water leaks.
Pic #80 Auto/Manual Screen
WARNING
!
INSURE THAT ALL PERSONAL OR ANYONE ARE CLEAR FROM THE
EQUIPMENT BEFORE FORCING ANY OUTPUT ON.
