© Motor City Wash Works, Inc. 48285 Frank, Wixom Michigan 48393 U.S.A.
Phone: 248.313.0272 ▪ Fax: 248. 313.0271
REVISION 5-20-21
www.motorcitywashworks.com
2
Notes and Safety Symbols
Where necessary, important points will be highlighted in this manual using the following symbols:
NOTE:
PROVIDES FURTHER INFORMATION!
WARNING!
DANGEROUS SITUATION WHICH MAY CAUSE
EQUIPMENT DAMAGE, PERSONAL INJURY OR FATALITIES!
Always follow all “Notes”, “Warnings” and “Instructions”. Failure to do so may have serious consequences on the
overall performance of the equipment and/or the safety of the people working on the equipment!
Air One Top Profiler Installation Procedure
Upon
receiving your MCWW equipment, open all boxes and crates and verify that you have all the required
components and there is no damage to the equipment. Verify that you have all your installation materials.
Remove
packaging material covering the dryer pallet and remove the two legs and bring them in the wash tunnel
in the area where the dryer will be installed. Make sure to install the flat side of the slotted channel towards the
outside of the dryer arch. You will be mounting the dryer motors there if available.
Pic #1: Driver’s and Passenger’s Side Legs they are the same.
STOP!
PRECAUTION TO AVOID EQUIPMENT
MALFUNCTION OR ERROR!
PLEASE COMMUNICATE WITH YOUR LOCAL MOTOR CITY WASH WORKS
REPRESENTATIVE IN THE CASE OF ANY DAMAGE TO YOUR EQUIPMENT!
