© Motor City Wash Works, Inc. 48285 Frank, Wixom Michigan 48393 U.S.A.
Phone: 248.313.0272 ▪ Fax: 248. 313.0271
REVISION 5-20-21
www.motorcitywashworks.com
13
Locate
the
PROFILER FABRIC NOZZLES
and select the nozzle with the smallest diameter, slide the opening on
the producer outlet. Push a
PLASTIC TIE
through the seam and pull through each of the
FOUR
PLASTIC TIE
MOUNTS
located on the producer outlet (see picture #20 below). Cut a slit in the fabric for the zip tie end to come
through as show below. Tighten the plastic tie and push the end back into the seam (see below).
DO NOT CUT
THE PLASTIC TIE!
Repeat for the other two nozzles.
Pic #20 Inner (Shorter) Fabric Nozzle
Locate
the
OUTSIDE FABRIC NOZZLES
and install on the outer ring following the same method as the
INSIDE
NOZZLES
(see picture #21).
Pic #21 Outer (Longer) Nozzle
