Page 15
Using your S1 DHC
The S1 DHC is extremely simple to control. There is one main button that is used to start and stop the trolley, whilst also
controlling the speed, which can be adjusted while
the trolley is stationary or in motion. The trolley has
9 speed settings (1 to 9) with 1 being the slowest
and 9 the fastest. To increase the speed, rotate the
speed dial clockwise, or anti-clockwise to decrease
the speed.
To start the trolley, simply select your required
speed setting and press the button. The trolley will
smoothly accelerate until it reaches the selected
speed. To stop the trolley, simply press the button
again - there is no need to reduce the speed setting.
Power and Battery Level
There are two indicating LEDs below the speed
display. The right hand LED displays the battery
capacity (green, amber or red) and will illuminate as
soon as the battery is plugged in. The left hand LED will illuminate when the trolley has been started.
The trolley is designed to protect your battery from being fully discharged. If the battery capacity drops too low, the trolley will
cut power to the motor and a flashing ‘b’ will be displayed on the screen.
Using your S1 DHC / Power and Battery Level
