GB.8-V2
LOAD ERROR
CRANKING VOLTS
××.××V LOW
LOAD ERROR :
The tested battery is bigger
than 450CCA . Or the clamps
are not connected properly. Please fully charge the
battery and retest after excluding both previous reasons.
If reading is the same, the battery should be replaced
immediately.
14.
Press
«ENTER»
return to step 5 or remove the test
clamps from the battery posts after completion of testing
batteries to end test.
SYSTEM TEST
Example :
1.
Press
«ENTER»
button, you
will view the following screen:
2.
Turn off all vehicle accessory
loads such as lights, stereo
system, etc. before starting the
engine.
3.
When the engine is started, one of the three results will
be displayed along with the actual reading measured.
CRANKING VOLTS NORMAL
The system is showing normal
draw.
Press
«ENTER»
to
perform the charging system test.
CRANKING VOLTS LOW
The cranking voltage is below
normal limits; troubleshoot the
starter with manufacturers recommended procedure.
SYSTEM TEST
××.××V
TURN OFF LOADS
START ENGINE
CRANKING VOLTS
××.××V NORMAL