GB.7-V2
GOOD & PASS
××.××V ×××× SAE
BAD & REPLACE
××.××V ×××× SAE
GOOD & RECHARGE
××.××V ×××× SAE
RECHARGE & RETEST
××.××V ×××× SAE
BAD CELL & REPLACE
××.××V ×××× SAE
TESTING
IS BATTERY
▲
\
▼
↵
CHARGED? YES
11.
Test the battery for few
seconds.
12.
Press the
▲
\
▼
key to select
battery fully charged or not
(YES or NO) if tester asks.
Press «ENTER» to confirm
choice.
13.
When the test is completed, the display shows the
actual volts and the actual CCA or %. {Press the
▲
\
▼
key to select: SOH (STATE OF HEALTH) or SOC
(STATE OF CHARGE)}.
One of six results will be displayed:
GOOD & PASS :
The battery is good & capable
of holding a charge.
GOOD & RECHARGE :
The battery is good but needs
to be recharged.
RECHARGE & RETEST :
Battery is discharged, the
battery condition cannot be
determined until it is fully charged. Recharge & retest
the battery.
BAD & REPLACE :
The battery will not hold a
charge. It should be replaced
immediately.
BAD CELL & REPLACE :
The battery has at least one
cell short circuit. It should be
replaced immediately.