GB.11-V2
EXCESS RIPPLE DETECTED
One or more diodes in the
alternator are not functioning
or there is stator damage.
Check to ensure the alternator mounting and
connections are sturdy. If the mounting and connections
are good, replace the alternator.
10.
Press the
«ENTER»
key to continue the charging
system with accessory loads. One of the three results
will be displayed along with the actual testing measured.
CHARGING SYSTEM HIGH WHEN TEST WITH
ACCESSORY LOADS
The voltage output from the
alternator to the battery
exceeds the normal limits of a functioning regulator.
Check to ensure there are no loose connections and
that the ground connection is normal. If there are no
connection issues, replace the regulator. Since some
alternators have the regulator built-in, this may require
you to replace the alternator.
CHARGING SYSTEM LOW WHEN TEST WITH
ACCESSORY LOADS
The alternator is not providing
sufficient current for the
system’s electrical loads and the charging current for
the battery. Check all connections and ensure the
alternator is rotating with the engine running. If the
connections from the alternator to the battery are loose
or heavily corroded, clean or replace the cable and
retest. If connections are in good working condition,
replace the alternator.
RIPPLE DETECTED
××.××V HIGH
ALT. LOAD VOLTS
××.××V HIGH
ALT. LOAD VOLTS
××.××V LOW