INTRODUCTION
0 - 3
Engine V1100
0.1. INTRODUCTION
0.1.1. FOREWORD
This manual provides the information required for normal servicing.
This publication is intended for use by
Moto Guzzi
Dealers and their qualified mechanics; certain information has been
omitted intentionally, as this manual does not purport to provide a comprehensive treatise on mechanics. The persons
who will use this manual must be fully conversant with the basics of mechanics and with the basic procedures of
motorcycle repair. Without such familiarity, repairs and checks could be ineffective and even hazardous. Since the repair
and vehicle check instructions are not exhaustive, special care must be taken to avoid damage and injury. Repairing or
inspecting a motorcycle when one does not possess such basic knowledge or training could result in improper servicing
and make the motorcycle unsafe to ride. For the same reason, certain basic precautions have been omitted in the
descriptions of repair and inspection procedures; you are therefore invited to take special care to avoid damage to
motorcycle components or injury to persons.
Moto Guzzi
s.p.a.
undertakes to constantly improve the design of its
products and the relevant literature to ensure that the customer is satisfied with the product. The main technical
modifications and changes in repair procedures are communicated to all
Moto Guzzi
dealers and agencies worldwide.
Such modifications will be included in subsequent editions of the manual. Should you require assistance or clarifications
regarding inspection and repair procedures, please contact the
Moto Guzzi
SERVICE DEPT., which will be pleased to
help, as well as providing you with updates and technical modifications regarding the vehicle.
Moto Guzzi
s.p.a.
reserves the right to make changes to its products at any time, barring any such changes as may alter
the essential features of a product as specified in the relevant manual.
All rights of storage using electronic means, reproduction and total or partial adaptation, whatever the means adopted,
are reserved in all countries.
The mention of third parties’ products is only made for information purposes, and constitutes no engagement.
Moto Guzzi s.p.a.
is not liable in any way for the performance or use of these products.
For further details, see REFERENCE MANUALS.
First edition: October 2005
Produced and printed by:
VALLEY FORGE DECA
Ravenna, Modena, Torino
DECA S.r.l.
via Vincenzo Giardini, 11
48022 Lugo (RA) - Italy
Tel. +39 - 0545 216611
Fax +39 - 0545 216610
E-mail:
www.vftis.com
On behalf of:
Moto Guzzi s.p.a.
via E.V. Parodi, 57- 23826 Mandello del Lario (Lecco) - Italy
Tel. +39 – 0341 - 709111
Fax +39 – 0341 - 709220
www.motoguzzi.it
www.servicemotoguzzi.com
Summary of Contents for Engine V1100
