8. Map
(continued)
Track Types
A solid red line represents your path while recording a track with the
Track Recorder. Use the "Start Track", "Pause Track" and "Save Track"
controls on the Record Track page to record and save your track. (In
MotionX-GPS v18.0 and above you may change the color of your recorded
track)
A dotted red line represents an interpolated path between two points
when signal has been lost while the Track Recorder was running.
A solid blue line traces your path when a GPS signal is active and the
Track Recorder is not in use. In the event that you forgot to start the
Track Recorder, you can save these blue tracks to the Logbook. Select
Realtime Track > Save in the Options menu on the Map page. All blue
tracks will be combined into a single track and saved.
A dotted blue line represents an interpolated path between two points
when signal has been lost and the Track Recorder was not running.
A dashed green line from the arrow indicates the path to the waypoint
you have chosen as your destination using the Go To or Start Nav
buttons.
A dashed orange line represents a previously recorded track that is being
followed. A green start flag indicates the start of the track and a
checkered end flag indicates the end.
US and Foreign Patents Granted and Pending.
Fullpower®, MotionX®, TapTap®, and ShakeShake® are registered trademarks of Fullpower Technologies,
Inc.
All other trademarks remain the property of their respective owners. © Copyright 2003-2013 Fullpower Technologies, Inc. All rights reserved.
20
