Startup
25
Manual # 42-02-U001, Rev C1
Note
If any displayed values are significantly different than those shown, contact MCE Technical
Support.
Table 8. Display Values
Param
#
Parameter Name
Description
Units
Typical Value
FUN2-Status Display
F2-1
UPS Operating Cur-
rent
Display shows UPS actual operating cur-
rent as percentage of maximum
%
Zero when normal Power
is present.
Job dependent when
backup power is operat-
ing
F2-2
UPS actual input
Voltage
Display UPS actual input voltage
Volts
120 for 1 and 3kVA,
220 for 6kVA
F2-3
UPS actual input
voltage when last
fault occurred
Display UPS actual input voltage when last
fault occurred
Volts
190
F2-4
UPS actual output
Voltage
Display UPS actual output Voltage
Volts
120 for 1 and 3kVA,
220 for 6kVA
F2-5
UPS actual input fre-
quency
Display UPS actual input frequency
Hz
60
F2-6
UPS battery voltage
per cell
Display UPS battery voltage per cell
Volts
13.8
F2-7
UPS operating tem-
perature
Display UPS operating temperature
C
25 to 30
F2-8
TAPS countdown
from UP output to
REV output
TAPS countdown from UP output to REV
output
Seconds Decrementing display
Summary of Contents for TAPS
