Motic Instruments Inc. Canada
October 06, 2006
23
3.13 Connecting the lamp house to the power supply:
Turn OFF the power switch on the power supply.
Fig. 19
3.14 Check the input voltage
•
Confirm that the input voltage marked on the rear panel of the power supply
matches your available line voltage.
•
Use a power cord that is rated for the voltage used in your area and that has been
approved to meet local safety standards.
Using the wrong power cord could
cause fire or equipment damage.
•
When using the extension cord, only use a power supply cord with a protective
earth (PE) wire.
•
Plug the lamp input connector into the output connector on the rear panel of the
power supply and secure by tightening the locking ring.
•
Plug in the power cord supplied with the power supply into the AC receptacle on
the rear panel of the power supply.
Input voltage marking
Lamp input connector
AC IN receptacle