KERN Optics OBS 101 User Instructions Download | Manualshive

Page: 1 / 23

background image

OBS-1-BA-e-1912

KERN & Sohn GmbH

Ziegelei 1
D-72336 Balingen
E-Mail: [email protected]

Tel: +49-[0]7433- 9933-0
Fax: +49-[0]7433-9933-149
Internet: www.kern-sohn.com

User instructions

Transmitted light school microscope

KERN OBS-1

                                          OBS 101, OBS 102, OBS 103, OBS 104,
                                          OBS 105, OBS 106
                                          OBS 111, OBS 112, OBS 113, OBS 114,
                                          OBS 115, OBS 116



Version 1.2
01/2019

1
2
3
...
»

Summary of Contents for OBS 101
























Reviews:

No comments

Related manuals for OBS 101

Brand: OPTO-EDU Pages: 16

Brand: Labnics Equipment Pages: 6

Brand: Tasco Pages: 72

Brand: Sun Telecom Pages: 8

Brand: Leica Pages: 160

Brand: Van Guard Pages: 21

Brand: Omax Pages: 7

Brand: Olympus Pages: 32

Brand: Olympus Pages: 38

Brand: ThermoFisher Scientific Pages: 206

Brand: Lintech Pages: 17

Brand: KERN Optics Pages: 17

Brand: KERN Optics Pages: 17

Brand: KERN Optics Pages: 19

Brand: KERN Optics Pages: 21

Brand: KERN Optics Pages: 29

Brand: KERN Optics Pages: 27

Brand: KERN Optics Pages: 41

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands