24
Fig.37
7.4.2 Replacing the fluorescent bulb
When replace the 7W incident illumination fluorescent bulb, first, rotate the screw on the white
panel to the left or right (Fig.38) and then remove the panel (Fig.39).
Next, grab the right side of the housing and while
pulling in from the backside (Fig.40), pull
outwards to remove the socket
(Fig.41). Remove the bulb from the socket (Fig.42); replace with
a new one; push the socket back into the lamp housing; and replace the white panel.
Remember, the surface of the bulb must remain clean. Fingers must not come in contact with the
glass surface. Residue left behind by fingers touching the glass affects heat distribution.
Fig.38
Fig.39
Summary of Contents for 1100200600841
