Motic 1100200600841, Instruction Manual

Page: 5 / 33

4
1. PLEASE FOLLOW THESE INSTRUCTIONS CAREFULLY
1.1 Use
：
This microscope is to be used for observation purposes only.
1.2 Do not disassemble
：
Disassembly may lead to possible damage of the instrument and voidance of warranty. If a problem is
discovered, please contact the Motic dealer nearest you.
1.3 Avoid getting burnt:
Wait for the bulb and surrounding parts to cool down before changing. Keep flammable objects
(gasoline, alcohol, cloth, paper, etc.) away from the bulb to avoid the possibility of a fire.
1.4 Check input voltage:
The label on the back of the microscope clearly specifies the microscope’s input voltage which must be
compatible with the local power supply. Using the microscope with a non-specified voltage rating can
lead to damage of the instrument.
1.5 When changing the bulb please note:
Only specified halogen bulbs and fluorescence tubes may be used.
Before changing the bulb, turn off the power and unplug the power cable to avoid being electrocuted.
When changing the bulb, do not let the bulb get dirty. The outer surface of the bulb must not be
contaminated with dust or fingerprints etc.
1.6 Storage
：
Before moving the microscope, be sure the power is switched off.
Microscope working temperature and humidity requirements:

Room temperature: 5°C ~ 35°C;

Maximum relative humidity: 65%
1.7 Operation
：
This microscope is a high precision instrument and must be handled and operated with extreme care.
Jolting or aggressive operation can lead to damage of the instrument.