Motic 1100200600841, Instruction Manual

Page: 21 / 33

20
6. MICROSCOPE ASSEMBLY
6.1 Unpacking the microscope
The microscope’s various components are all packaged separately. When opening the packaging be
extremely careful and be sure not to misplace any parts. Ensure you have assembled all of the
components in their proper places before removing the packing box. If damage to the instrument is
discovered upon opening the packing box, immediately contact the carrier and supplier.
6.2 Microscope assembly

When moving the various components, especially the optical components, fingers and oily
materials should not come in contact with the surface of the lenses. Fingerprints and oil stains on
the lenses will result in poor image quality and possibly damage to the instrument.

Place the microscope’s optical body into the body support (microscope carrier) and tighten the
holding screw located on the left of the support to secure the optical body.

Remove the packing material from the eyepieces and other optical components (without touching
the lens surfaces). Being very careful not to touch the lens surfaces, slide the eyepieces into the
observation tubes.