Moteurs Baudouin 12M26 Series, Operation & Maintenance Manual

Page: 47 / 70

Operation & Maintenance Manual for 12M26 Series Gas Engine
38
（
4
）
After the sealing gasket touches the filter seat, tighten 3/4 to 1 more turns to seal tight;
（
5
）
Start the engine to check for oil leakage.
Figure 4-6.Oil filter
◆
Check and adjust intake/exhaust valve clearance
（
seen in appendix 1.3
）
◆
Check the intake system
Check the intake hose for cracks due to aging, and check the clamp for loosening. When
necessary, tighten or replace the related parts to ensure the tightness of intake system.
◆
Check the Air Filter Element
When the intake resistance indicator alarm (Reddish status as shown in Figure 4-7), should be
shot down maintenance of air filter outside the filter.
Figure 4-7 Indicator
T
ype I: Radial seal air filter
(1) Check whether the inner surface of the outer filter and the outer surface of the safety filter
are dusty, if there is dust, the outer filter is damaged or the installation is not in place, which
should be highly valued;
(2) Use less than 0.5MPa clean air from the inside out on the outer filter dust, prohibit the use