Moteurs Baudouin 12M26 Series, Operation & Maintenance Manual

Page: 33 / 70

Operation & Maintenance Manual for 12M26 Series Gas Engine
24
SPEED BIAS ： If the switch is on ， the voltage signal of control panel was transferred to Speed
Bias interface.
RAISE SPEED AND LOWER SPEED: This switch can be connect or reserved
，
the engine’s
speed can be controlled by manual.
If the engine is at the rated speed, the RAISE SPEED switch is on then the engine’s speed raised
to the maximum limited speed according to a certain rate. The switch is off then the speed is kept
in current speed.
If the engine is at the rated speed, the LOWER SPEED switch is on then the engine’s speed
reduced to the minimum limited speed according to a certain rate. The switch if off then the speed
is kept in current speed.
ALARM RESET
：
If the switch is on
，
all alarm informations can be reset.
Fault diagnosis interface ： It can be used to data calibration and fault diagnosis.
Fault diagnosis interface ： It can be used to fault diagnosis.